HomeProducts for TaiwanEquipmentFogmaster Foggers

Fogmaster Tri-Jet 6208

The time-proven Fogmaster Tri-Jet 6208 fogger has served users for more than four decades, and is still going strong. Food plants, hotels, barns, parks, schools, locker rooms and long term care facilities are just a few examples of sites that depend on the Fogmaster Tri-Jet for effective treatment. A "cold" fogger, the 6208 can atomize either water- or oil-based solutions. A one-turn control knob adjusts particle size and degree of misting, and the power head can be adjusted up or down to the angle required. You can control it with a timer or sit it on a turntable for uniform application. And it can even run "dry" without harm.

Maintenance-free, reliable and durable, it continues to serve – indoors or out – disinfecting and sanitizing, mitigating odors, controlling mold and mildew, aiding in flood and fire damage restoration, controlling mosquitoes, flies and other insects and many other applications.

Fogmaster's original tri-jet design continues to set the standard against which all others are measured.


Motor 1 Hp, 50/60 Hz
620810: 120VAC, 7 amp
620820: 220-240VAC, 3.5 amp
Fogging Nozzle Three counter-rotating vortex nozzles
Particle Size 15-30 micron VMD, adjustable
Chemicals Handles both oil- and water-based chemical solutions
(Liquid viscosity and density affect particle size distribution)
Liquid Flow Rate 0-9 oz/min [0-270 ml/min], adjustable with 1-turn valve
Tank Capacity 1 gallon [4 liters]
Materials of Construction Power head housing and tank - aluminum
Tubing - fuel and oil resistant vinyl
Fittings and control valve - brass
Nozzle - Celcon® acetyl copolymer
Regulatory Compliance UL, CSA, CE, PSE
Dimensions H x L x Dia:
15.4 x 12.5 x 8.6 in
39 x 32 x 22 cm
Shipping Weight 12 pounds


Micro-Jet ULV 7401

The Fogmaster Micro-Jet ULV 7401 fogger allows precise adjustment of particle size, to less than 7 micron VMD for ultra low volume application. This allows use of more concentrated fogging solutions and speeds up treatment time; the Micro-Jet covers 2-4,000 cubic feet per minute when applying ULV insecticides at typical label rates.

A 9-turn precision valve controls liquid output and droplet size. Set the valve to a low flow rate to produce near-invisible ULV droplets. For heavier fogs and mists, increase the flow rate. Once the valve setting is established, you can use the vernier calibration to return to the same setting. You can also snap a lock ring to prevent accidental changes.

Chemical flow rate is easily calibrated in the field to adjust for differences in liquid density, viscosity or surface tension. The Micro-Jet handles both water- and oil-based liquids, so this one machine can satisfy all your fogging requirements.

The Micro-Jet ULV is widely used in schools, restaurants, zoos, barns, hotels, and similar locations requiring professional application. Light-weight, and supported by our five-year limited warranty, the Fogmaster Micro-Jet ULV is an outstanding choice.


Motor 740110: 1 Hp, 120VAC 50/60Hz, 7 amp
740120: 1 Hp, 220-240V 50/60 Hz, 3.5 amp
Fogging Nozzle High-shear, counter-rotating vortex design
Particle Size 7 - 30 micron VMD, adjustable
(ultra fine, dry fog to heavy, wet fog)
Liquid Flow Rate 0-8 oz/min [0-250 ml/min]
Nine turn vernier valve
Valve lock feature
Chemicals Water- or oil-based solutions
Tank Capacity 1 gallon [4 liters]
Materials of Construction Power head housing and tank - aluminum
Tubing - fuel and oil resistant vinyl
Fittings - brass
Control valve - glass filled nylon, stainless stem
Seals & O-rings - Viton®
Nozzle - Celcon® acetyl copolymer
Options HDPE nozzle for strong oxidizers
Stainless steel fittings
Stainless steel tank
HP (high pressure) motor: 740112, 740122 [8A; 4A]
Tank with float valve (brass; 1/4" compression fitting)
Regulatory Compliance UL, CSA, CE, PSE
Dimensions H x L x Dia:
15.4 x 10.4 x 8.6 in
[39 x 26 x 22 cm]
Shipping Weight 12 pounds [6 kg]


Fogmaster jr 5330 (Small general utility fogger)

Fogmaster® Jr. 5330

The baby of the Fogmaster family, the Jr 5330 is constructed of corrosion resistant materials and offered in 120 and 240VAC models.

When a smaller or less expensive fogger is needed, consider the jr. Among its many uses are:
    • Car detailing
    • Rental car turnarounds
    • Hotel room smoke odors
    • Treat pet stains and odors
    • Control flying insects on patios and lawns
    • Apply BT or soap solutions to gardens (get underside of leaves)
    • Mist cut flowers and interior foliage
    • Apply waxes and shines
    • Soften leather
    • Apply preservatives and lubricants
    • Hydroponics growers

It's easy to use. Twist the power head to detach the tank. Pour in your solution. Another half twist and you're good to go. Slide the switch on the handle and adjust the rotary valve to adjust droplet size.

The Fogmaster Jr - for those "in between" jobs - too small for an industrial unit, too large for a trigger sprayer or pump-up.


Motor 533010: 1/4 Hp, 120VAC 50/60 Hz, 3 Amp;
533020: 1/4 Hp, 220-240VAC, 50/60 Hz, 1.5 Amp
Liquid Capacity One quart [950 ml]
Two quart [1.9 liter] (available Q4 '13)
Chemicals Any lightweight liquid. Nozzles can atomize both oil-based and water-based fluids.
Particle Size 15-40 microns, adjustable.
Discharge Rate 0-3 oz [120 ml] /min, adjustable
Power Cord, Plug 9 ft, NEMA 515, 615 [US]
2.5 m, Euro plug
2.5 m, PSE Japan plug
25 ft, UK plug
Materials of Construction Nozzle and Housing - nylon
Tank - polyethylene
Seals & O-rings - Viton®
Tubing - fuel and oil resistant vinyl
Fittings - brass
Tank gasket - Urethane foam (standard);
    Optional: Buna-N, Viton®
Regulatory Compliance UL, CSA, CE, PSE
Dimensions Height: 10 in [25 cm]
Width: 4.5 in [11 cm]
Length: 11 in [28 cm]
Packaging Single unit
Cases: 6, 12 or 18 units
Pallet: 105 units
Shipping Weight Single unit: 5 lb [2 kg]
Case 6: 30 lb [10 kg]
Case 12: 54lb [22 kg]
Case 18: 80 lb [32 kg]
Pallet 105: 510 lb [200 kg]
Joomla templates by Joomlashine